Public Folders Clear Close Return Deselect All Deselect all Deselect All Select or Deselect all B I U Home Launch Show tenant's content only Tenant Impersonation Impersonating: My Area Options Help Options Launch Options Modified Description Expand to read the full description Collapse to read the short description IBM Cognos Analytics () IBM Cognos Analytics My Portal IBM Corp. Select All Select all Select All My Area IBM Cognos Software IBM Cognos software Help No entries. You do not have the required privileges to see the entries. Access denied. You do not have sufficient privileges to access the page layout. End of List. The page cannot be displayed. The location may have been deleted or you may not have sufficient privileges to see it. Click to display your home page. Open Disabled Select a folder... Set preferences Set properties View my capabilities - View my capabilities... View my permissions - View my permissions... View package data sources - View the package data sources... Perform an action - Create... Set properties - Permissions - Permissions User ID: Password: Confirm Password: No output available. Day Range Entry Not Available Unavailable This page cannot be displayed. It may have been deleted or you may not have sufficient privileges to see it. Page disabled. The page is temporarily unavailable. Cannot access page. You do not have sufficient privileges to view this page. There are no tabs available in your portal. Tabs unavailable Click to Restore Minimize Scroll left Scroll right Please wait... IBM Cognos software: Series 7: Download The download file name cannot contain any of the following characters: \ / : * ? " < > | These characters will be replaced by '_' in the download name. Your session has timed out. Please restart the application to log on again. Home Options Home Set View as Home Set as Home Page Modify the sequence of tabs... Add tabs... Edit this page... Remove this tab Create a page... Remove the tab '' ? Home page cannot be displayed. It may have been deleted or you may not have sufficient privileges to see it. You should reset home page. Home page cannot be displayed. Domain name validation for the URL: has failed. You should reset home page or ask the administrator to permit connections to your home page domain. Add tabs Close and return to my portal tabs Add to my portal tabs Target IBM Cognos Metric Studio No content. Top of page. Press Enter to jump to the page contents. Press Alt P at any time to go to page navigation. Start of contents. Skip to main content Skip to main tabs Drill Menu for My Communities The page cannot be displayed. The object may have been deleted or you may not have sufficient privileges to see it. The '' default user profile doesn't exist. Create it now? View RSS feed Expand Collapse - Choose an entry to remove by selecting the check box for that entry in the selected entries table. Last refresh time: - Selection for item Table display of IBM Cognos content My Inbox My Connections Activities Collaboration Lotus Connections Unable to access . Please try again later or contact your administrator. Information Tip Page content Common tools Ritch Text tools Autentication menu Search menu Home menu Personal settings menu Launch menu Help menu Page menu Content task menu Metrics task menu Query service task menu Dot Checked Single Selection Error hidden

Assign routing sets - Type or select the routing sets to assign to this entry. The requests related to the entries of a set can be routed to a selected server group. Some routing sets are present more than once. Duplicate entries will be eliminated. Available routing sets: Select the routing sets you want and click the Add button to update the Assigned routing sets list. Type routing sets: Type the names of the new routing sets to add, separated by a semi-colon and click the Add button to update the assigned routing sets list. For example, "Red; Blue; Green;" Assigned routing sets: Add Add existing routing sets Add new routing sets Remove

Specify the routing rules Routing rules specify how to route server requests. Each routing rule includes a data routing tag that is applied to packages, data modules or uploaded files, a group or role routing tag, and a server group. To add a rule, select from the available routing tags and server groups. Routing rules: Data routing tag Group routing tag Role routing tag Sequence Route to Server group Actions No rules specified Add a rule Role Group (None) You must specify at least one data routing tag or user routing tag to have a complete routing rule. You must select a server group. Some routing rules are present more than once. Duplicate entries will be eliminated. Some of the routing rules refer to server groups that cannot be located. Do you want to delete these rules? View expanded routing rules... (Any data object) (Any group) (Any role) View the members View the members for sequence number View the members Data routing tag: Group routing tag: Role routing tag: Server group: None

View expanded rules A routing rule consists of a set of tags for a data object for a group, a role, or for all three, and of a server group. With the expanded view each routing tag displays the associated data object, groups, or roles respectively. Sequence Linked with data object Initiated by groups Initiated by roles Route to Server group

Modify the sequence of routing rules Routing rules: Package set: Group set: Role set: Server group: Any package Any group Any role None

Red: Green: Blue: Preview: Web safe colours Named colours Custom colour Apply now Black Gray Maroon Purple Green Olive Navy Teal Silver White Red Fuchsia Lime Yellow Blue Aqua

File System Location Configuration Folder Workspace Folder Dispatcher Drill-through definition Folder Namespace Folder Folder Folder Content maintenance Data source Connection Signon Data Set Dynamic cube data source Dynamic cube virtual data source Export Import Content maintenance Index update Folder Job Job step Launchable Advisor view Advisor canvas Cognos Insight Model Model view Page definition Portal Portal Package Folder Style Folder Folder Portlet Group Portlet PowerPlay 7 cube explorer PowerPlay 7 report PowerPlay cube PowerPlay report PowerPlay report view Report template Printer Schedule Secured feature Secured function Visualization Library folder Adaptive Analytics service Agent service Annotation service Batch Report service Content Manager Cache service Content Manager service Data Advisor service Data Movement service Data movement Data movement view Migration Delivery service Event Management service EV service Graphics service Human task service Interactive Discovery Visualization service Index Data service Index Search service Index Update service Job service Log service Metric Studio service Mobile service Data Integration service Migration service Monitor service Metadata service Planning Administration Console service Planning data service Planning Runtime service Planning Task service Presentation service Query service Relational Metadata service Report Data service Report service Repository service PowerPlay service Statistics service System service agent agent view export import index update content maintenance task job analysis Analysis query Root Query query service administration task report Report report view Report view shortcut metric import metric import metric import from files metric export planning macro planning task metric maintenance data movement data movement view migration Drill-through Definition event list IBM Cognos BI for Microsoft Office Document Document - Rule Folder Watch rule output Tenant Unknown

: , . ...

Details View List View New Folder New Package New URL New Role New Group New Data Source New Folder New Connection New Printer New Page New Query service administration task Select the options - Link to content from a remote system Link to My Folders from a remote system Configure - Specify the starting folder to use when this entry runs. Starting folder: Browse Enter a Content Reference name Enter a name to link to your remote personal content. Working... New Workspace Import Export New Signon New signon. Not available for connections using an external namespace for authentication. New Distribution List New Job New Style Sort Default Sort Ascending Sort Descending Sort Search Search on feild menu Search method menu Search modified menu Search type menu Search scope menu Search Options Advanced Properties - Configuration Edit Default User Profile Specify Routing Rules Define Paper Sizes Define File System Locations Import Portlets Edit Cut Copy Paste Paste signon. Not available for connections using an external namespace for authentication. Delete About About New Contact New Export Update Export New Import New Index Update New Content Maintenance Update Import Order New Metric Maintenance New Data Integration Task New Metric Package New Drill-through Definition

The name '' already exists. You can replace the existing entry or enter a new name. The name '' already exists. You can enter a new name for the entry. Would you like to replace the existing entry and all other conflicting entries that exist in that location? Error overwriting the object. It is possible that there is a name conflict with other objects in the target location. Enter a new name: Replace the existing entry Yes No OK Cancel Do you want to continue? The value cannot be empty. Please enter a new name. The URI '' is invalid. Please enter a new URI: Warning Error

Welcome - New Data Source wizard Finish - New Data Source wizard The New Data Source wizard successfully created a data source and a first connection in the server. The New Data Source wizard has been canceled. A new data source was not created. The New Data Source wizard helps you create a data source and a first connection in the server. It also gives you the option to test the connection and to create a first signon. You can click back at any time to change your settings. Please click Next to start creating the data source.

New Select an action - Select whether you want to run, schedule, or save only, when the wizard closes. Action: Save and run once Save and schedule Save only Shortcut to New Data Source wizard Specify the commands - New Data Source wizard Finish - New Data Source wizard Create a package Create a Metric Package New Shortcut wizard New Report View wizard New Data Movement View wizard New PowerPlay Report View wizard New Agent View wizard New Distribution List wizard New Role wizard New Group wizard New Signon wizard New Job wizard New Configuration Folder New page wizard New Content Reference wizard New Paper Size wizard New File System Location New Query Service Administration Task wizard New Tenant Specify the commands that the database executes when certain events occur. Specify the commands that the database executes when certain events occur. By default, this connection acquires its properties from its parent data source. You can override those properties by setting commands explicitly for this connection. No parameters are required to build an IBM Cognos Planning - Contributor connection string. Edit the parameters to build connection string. a Composite (ODBC) an IBM Cognos Virtual View Manager (ODBC) a TM1 an IBM Planning Analytics an OData a JSON a MongoDB an IBM Cognos Now! - Real-time Monitoring Cube an IBM Cognos Finance an IBM Cognos Planning - Contributor an IBM Cognos Planning - Series 7 an IBM Cognos PowerCube an Oracle Essbase a Microsoft Analysis Services (HTTP XMLA) a Microsoft Analysis Services 2005 a Microsoft Analysis Services 2008 a Microsoft Analysis Services 2012 a Microsoft Analysis Services 2014 a Microsoft Analysis Services 2016 a Microsoft Analysis Services 2017 a DB2 a Microsoft SQL Server (OLE DB) a Microsoft SQL Server (SQL 2005 Native Client) a Microsoft SQL Server (SQL 2008 Native Client) a Microsoft SQL Server (Native Client) an Oracle an External Repository an ODBC a Progress OpenEdge (ODBC) a SAP BW a SAP R3 a SAP R3 a Salesforce.com a Siebel a SAP BW for Planning a SAP Sybase ASE (CT-Lib) a SAP Sybase ASE a Sybase IQ (ODBC) an Informix an XML a Teradata (ODBC) a Netezza (ODBC) a Red Brick (ODBC) a Microsoft SQL Server (ODBC) a JDBC an Oracle (driver: oracle.jdbc.OracleDriver) a DB2 (driver: com.ibm.db2.jcc.DB2Driver) a Microsoft SQL Server (driver: com.microsoft.sqlserver.jdbc.SQLServerDriver) a Teradata (driver: com.teradata.jdbc.TeraDriver) a Netezza (driver: org.netezza.Driver) URL: Type a URL that contains an acceptable domain. View acceptable domains Acceptable domains The url cannot be displayed because it did not pass validation. The url is not a valid url. New Contact wizard Select the members of this entry. Enter the user ID and password for the new signon. Enter the cube password for the new signon. Specify the users, groups, and roles that can use the new signon. New Import wizard New Content Task: Create Content Utilization Info New Content Maintenance Task wizard: Consistency Check New Content Maintenance Task wizard: Report Upgrade New Content Maintenance Task wizard: Retention Rule Update New Content Maintenance Task wizard: Content Archival New Content Task: Create Content Utilization Info New Content Maintenance Task wizard: Content Removal New Index Update Wizard New Export wizard Select the steps - Select the delivery methods - Select whether the reports produced by this job should be saved, printed or sent via electronic mail. For burst reports, the email recipients are determined by the burst specification. At least one option must be selected. Set the schedule - You can schedule the to run at a recurring date and time. Schedule the Credentials: Unavailable None Use my credentials New URL wizard New Connection wizard Specify the commands - New Connection wizard Specify a signon - Select the users - Select the members - Specify the connection - Specify the connection string - Enter the connection string - Enter the connection string - Specify a name and location for this entry. Specify the parameters for the new connection. Specify the parameters for the connection of this new data source. The name of the data source is used to set the name of the connection. Specify a name and the URI for the location on the file system for this entry. You can also specify a description and screen tip. Specify a name and network address for this entry. You can also specify a description and screen tip. Specify a name, URL, and location for this entry. You can also specify a description and screen tip. Specify a name, email address, and location for this entry. You can also specify a description and screen tip. Specify a name and location for the deployment specification. You can also specify a description and screen tip. Metric Maintenance wizard New Metric Import from Files New Metric Maintenance New Metric Export New Metric Import From Files wizard New Metric Maintenance wizard New Metric Export wizard New Drill-through Definition wizard Specify a scope and target - is required Specify the scope to use in the package. Then, specify the report, query, or analysis to use as the drill-through target. Specify the target details - Select a target report Specify the action to take when clicking a drill-through link. Then, specify the prompt values, if any. If you select to view the most recent report, you do not need to specify values. New style wizard Specify style location and preview resource - Specify the location of style resources and the file to use as a preview resource. For the preview resource, specify only a file name when the preview resource is located in the default location; otherwise, specify a relative path including a file name. New Metric Import From Files Wizard Select the options - This entry imports data from files into the staging area of IBM Cognos Metric Studio. Select the options to use when this entry runs. New Metric Maintenance wizard Select the options - This entry maintains the IBM Cognos Metric Studio data. Select the options to use when the entry runs. New Metric Export Wizard Metric Export Properties wizard The Metric Export wizard successfully submitted the export. Schedule this export to run as a later time Save the export and close the wizard Specify the settings - New Package New Package wizard Select a data source Select which data source to use. Name List of all data sources: New Package Configuration wizard Specify the configuration settings for this entry. Default analysis: Select the default analysis to be used for this package. It will be used as a starting point when creating a new analysis. None Select an analysis... Retrieval limits: Specify the limits for the number of items to retrieve in studios, for this package. Name Value Value for Default member limit in a data tree level Maximum member limit in a data tree level Reset to default value The member limit cannot exceed . IBM Cognos Migration Assistant

Search for a user, group or role Search to find the user, group, or role for this entry. Search for a contact - Search to find the user, group, role, contact, or distribution list to use as a contact for this entry. Search for a target user - Search to find the target user. You must select at least one option for the type of entries to show in list. Search Search string: Enter search criteria Scope: Show in list: This folder only This folder and its subfolders Contains the exact string Starts with the exact string Matches the exact string Advanced Results Search results Search: Name or description field Full text and all fields Name field Description field Type: Any Any Include shortcuts Shortcut Status: Unread Read Running Error Warning Information Modified: Today In last 3 days In last week In last month In last 3 months In last 6 months In last 12 months In last 36 months Options: . Please type a search string. The search criteria must be more specific. Please enter a search string or specify an option. All folders Groups and roles Users Contacts and distribution lists Name and description only - string search Entire entry - keyword search Method: Score : Contains any of these keywords Last modified on: The entries returned in the search results relate to your previous content. Specify search criteria and click the search button to perform another search. View indexing details View indexing details - View indexing details for this entry. Last indexed: Terms XML Index data: Language: You do not have sufficient privileges to see the search results. Please enter criteria and click the search button to perform a new search. Refine by: Selected: Remove all Criteria: Description: Path: Metadata: Parameter: New search Loading... No entries. Searching.... All (Apply all selected criteria) Any (Apply any selected criteria) - of about Collapse details Expand details Recently used packages: Search

General General tab Connection Signon Members Settings Permissions Capabilities Job Your changes were not saved. Do you want to continue? Warning: If this query service is part of a server group either:\n\n a) Delete selected cubes from all query services in the group.\n\nor \n\n b) Remove this dispatcher from the server group.\n\nFailure to do so may result in errors. The access permissions for the selected entries were not set. Do you want to continue? Preferences Personal Printer User interface profile Paper size Deployment Export Content maintenance Index Update Task Import Content Administration Run options Data set The policy list will be acquired from the parent. You have not specified any permissions for some of the entries, so they will be deleted. Do you want to continue? You have not specified any capabilities for some of the entries, so they will be deleted. Do you want to continue? Unchecking this option will cause the parent's policies to be acquired. Any changes that were made to the policy list will be lost. Do you want to continue? Layout and Content Page Style Target Metric Import Metric Maintenance Metric Export Metric Package Planning Package Analytic package Deleting the columns will delete their contained portlets. Do you want to continue? PowerPlay 7 Report PowerPlay Report Configuration

Specify the properties for this entry. Specify the name and optional description for this entry. Name: Description: URL: Type: Disable this entry Hide this entry Contact: Contact Access Account: Location: Search path: ID: View the search path, ID and URL View the search path, ID and URL icon View the search path - Search path Entry icon: Specify an entry icon Select to use the standard entry icon or a specific icon. To specify an icon, specify only a file name when the icon is located in the default location; otherwise, specify a relative path including a file name. Specify an icon: Standard entry icon A system standard entry icon A specified custom entry icon Shortcut to : Shortcut to Source Properties Source entry not found Unavailable Source report : Source agent : Based on Style : Source data movement : Report Properties Agent Properties Data Movement Properties Link to a report... Link to an agent... Link to a data movement... Link to a package... Link to a metric package... Created: Modified: Icon: Standard Custom Edit... Indexed: Change the contact... Select the contact... Select the access account... Please type a name. Please type a name, a description or a screen tip. Please type a URL. Please select a remote folder. Set other languages... View other languages Language: Add another language... Location: Location: Select another location... Select My Folders Owner: Tenant ID: Tenant: (Inherited from parent) Make me the owner Set... Edit... The object tenancy was changed to match the new location. Select a tenant. Select the tenant to be assigned to this entry. Clearing the tenant will change the value to "None" and might allow other tenants to access the content. Click OK to make the entry public or Cancel to keep the current tenant. Changing the tenant of an entry also changes the tenant of all child entries. Clear Screen tip: The name of the entry must be defined for at least one language. The name of the entry must be defined for at least one language. The selected language will not be removed. Edit the multilingual properties - Specify a name, optional description, and optional screen tip for each language to use for the entry. View the multilingual properties - View the name, description, and screen tip for each of the languages defined. Add multilingual properties - Select a language, specify a name, optional description, and optional screen tip, and click Add. When you are done adding entries, click OK. Unavailable Remove values for this language Remove values for Language Changes have been made on this page. Click OK to ignore these changes and continue. There are outstanding Translation changes. Click OK to ignore these changes and continue. The name, screen tip and description are shown for the selected language. Gateway: Package: Select the default options to use for this entry. Query Mode: External repository: Compatible Dynamic Invalid [] Invalid - Possible conflicting values Unavailable Advanced routing Override the external repository acquired from the parent entry Override the routing sets acquired from the parent entry Connection: Routing sets: No values saved Select a connection... Clear Set... Edit... Unchecking this option will cause the parent's routing sets to be acquired. Any changes that were made to the assigned routing sets will be lost. Do you want to continue? Default action URL: None IBM Cognos software Your changes have not been saved. Do you want to save your changes before navigating to the source entry? Yes No Source report: XML database commands: Data source capabilities: Allow personal packages Allow web-based modeling This data source is not enabled for web-based modeling. To allow web-based modeling, configure a JDBC connection for this data source. Allow personal data Allow repository connections Allow reporting connections Allow atom content connections Variables

Specifies the report format, prompts, distribution and retention. Format HTML HTML fragment XHTML Excel Word PowerPoint Excel 2007 Word 2007 PowerPoint 2007 Excel 2010 PDF Excel 2000 Excel 2000 Single Sheet Excel 2007 Excel 2007 Data Office Connection-Enabled Excel 2007 Excel 2002 Delimited text (CSV) XML PDF (Restricted) Excel 2000 (Restricted) Excel 2000 Single Sheet (Restricted) Excel 2007 (Restricted) Excel 2007 Data (Restricted) Office Connection-Enabled Excel 2007 (Restricted) Excel 2002 (Restricted) Delimited text (CSV) (Restricted) XML (Restricted) You do not have the capability to run reports in this format, but you can access reports that are saved in this format. Use default language Prompts Distribution Printer Recipients Duration: Duration units. Day(s) Duration: Day(s) Month(s) Duration: Month(s). Schedule Priority: Frequency: Number of occurrences: Number of occurrences: occurrence(s). days(s). months(s). Schedule - Notify the contact: when successful when failed Report output versions: Report output versions: Report output versions Output versions: Output versions: Output versions Run history: Run history: Run history Setting the number of occurrences to zero (0) saves an unlimited number of occurrences. Any histories or output versions older than the age specified will be deleted. Document versions: Document versions: Document versions Versions Outputs

Condition: Tasks: Options Alert list: Allow users to add themselves to the alert list

Rules Alerts My Watch Items Source New versions become available Email News item Are you sure you do not want to be alerted for the selected entries? You do not have sufficient privileges to use Watch Rules. Existing Watch Rules will fail.

My Data Sets Package Refreshed File size (KB) Rows Unavailable Confirm delete Deleting entries may result in broken links. Are you sure you want to delete the selected entries? Delete packages and their contents Properties for this entry: Database table: Data source: The data set will continue to be imported in the background. It will be listed on the My Data Sets page when the data set is successfully imported. Use the Edit action from the My Data Sets page to publish a package for the new data set. The import process is taking a long time. The data set will continue to be imported in the background. It will be listed on the My Data Sets page when the data set is successfully imported. Use the Edit action from the My Data Sets page to publish a package for the new data set.

Specify the condition and select how you want to receive your report when the condition is met. Condition Delivery

Specify the location of style resources and the file to use as a preview resource. For the preview resource, specify only a file name when the preview resource is located in the default location; otherwise, specify a relative path including a file name. Style resources location: Preview resource:

Test the connection - Test the parameters that make up the database connection. Test the parameters that make up the external repository connection. The connection was tested successfully. Test the connection using: User ID and password Signon Dispatcher: You must select at least one dispatcher. Select whether to test the connection with a user ID and password, or with a signon. Select whether to test the connection with a cube password or with a signon. Select whether to test the connection with a user ID or with a signon. User ID Unknown Type Query Mode Compatible Dynamic Repository List of signons available for testing

Specify the parameters for the connection. Edit the connection string - Connection string: Isolation level: Configure JDBC connection Use the default object gateway Specify a value: Type: Composite (ODBC) IBM Cognos Virtual View Manager (ODBC) IBM Cognos Finance IBM Cognos Planning - Contributor IBM Cognos Planning - Series 7 IBM Cognos PowerCube IBM Db2 Microsoft Analysis Services (HTTP XMLA) Oracle Essbase MySQL Oracle ODBC Progress OpenEdge (ODBC) PostgreSQL SAP Sybase ASE (CT-Lib) SAP Sybase ASE SAP Sybase IQ (ODBC) IBM Db2 iSeries via IBM Toolbox for Java IBM Informix Dynamic Server IBM Big SQL IBM Db2 (JDBC) Hive Cloudera Impala IBM IMS SAP Sybase IQ and ASE SAP HANA Actian Matrix Vertica Exasol EXASolution Pivotal Greenplum Other type JDBC Oracle (JDBC) IBM Db2 (JDBC) Microsoft SQL Server (JDBC) Teradata (JDBC) IBM Netezza (JDBC) My Data Sets Repository Cursor stability Phantom read protection Read committed Read uncommitted Reproducible read Serializable Microsoft SQL Server (OLE DB) Microsoft SQL Server Microsoft SQL Server (SQL 2005 Native Client) Microsoft SQL Server 2005 Microsoft SQL Server (SQL 2008 Native Client) Microsoft SQL Server 2008 Microsoft SQL Server (Native Client) Microsoft SQL Server Microsoft Analysis Services 2005 (ODBO) Microsoft Analysis Services 2008 (ODBO) Microsoft Analysis Services 2012 (ODBO) Microsoft Analysis Services 2014 (ODBO) Microsoft Analysis Services 2016 (ODBO) Microsoft Analysis Services 2017 (ODBO) Test Signons: No signons defined signons defined Set signons... SAP BW SAP R/3 - ECC for Adaptive Warehouse SAP ECC Salesforce Siebel SAP BW for Planning XML Teradata IBM Netezza IBM Cognos TM1 IBM Planning Analytics OData JSON MongoDB Repository Type: Details External Repository IBM FileNet Content Manager IBM Content Manager File System Repository File System Root: Select a root from the list of alias roots configured in IBM Cognos Configuration. This connection cannot be edited or tested, the alias root configuration cannot be determined. Verify the alias root configuration in IBM Cognos Configuration for your active Content Manager. A file system repository connection cannot be configured, the alias root configuration cannot be determined. Verify the alias root configuration in IBM Cognos Configuration for your active Content Manager. IBM Cognos Now! - Real-time Monitoring Cube IBM Red Brick (ODBC) Microsoft SQL Server (ODBC) Specify the signon - Specify the signon Specify the user ID and password for the signon with the users, groups and roles allowed to use it. Set signons - Set signon Set the signons applicable to the connection and identify the users, groups and roles allowed to use them. User ID Users, groups and roles Edit the connection string Test the connection... Authenticate Testing Open connection commands Open session commands Close connection commands Close session commands Commands Edit... Set... Edit value for ... Set value for ... (None) Commands: Select a namespace to test. Select "No Authentication" to test without a namespace Cube password Cube password: Select whether a cube password is needed. Specify the parameters for the child connections of this data source. Delete child values Delete child values for A namespace must be defined before you can create a connection for an IBM Cognos Finance cube. Use IBM Cognos Configuration to define a namespace. You must select a namespace to use as an authentication source for this cube. A namespace must be defined before you can create a connection for an IBM Cognos Planning - Contributor version 7.3 data source. Use IBM Cognos Configuration to define a namespace. You must select a namespace to use as an authentication source for this data source. If the cube has been created using IBM Cognos Planning - Contributor version 7.3, indicate the Planning Administration Domain (PAD ID) and the namespace to use for the authentication. The port number is invalid. It must be a number between 0 and 65535 Cloudant CouchDB Facebook GeoJSON Google Analytics Google Places Google+ LinkedIn Twitter YouTube Data Other application/json application/xml text/plain

Specifies the members of the entry. User ID: Password: Confirm Password: The members of this group are all users, including anonymous users. The members of this group are all users who provide credentials, such as user ID and password, when they log on. The list contains entries that cannot be displayed. They may have been deleted or you may not have sufficient privileges to see them. Unable to remove all the members from this group. Unavailable

Schedule this entry to run at a recurring date and time. You can run using the default values or specify the options. You can disable the schedule without losing any of its details. Schedule the entry to run at a recurring date and time. You can disable the schedule without losing any of its details. Disable the schedule Start: Start date End date End: Month January February March April May June July August September October November December Day Monday Tuesday Wednesday Thursday Friday Saturday Sunday Relative week First Second Third Fourth Last By day interval choices Number of months. Every day(s) Number of days. Repeat by days. Every minute(s) Number of minutes. Repeat by minutes. Every hour(s) Number of hours. Repeat by hours. Every week(s) on: Number of weeks. The of every month(s) Day of every month(s) The of every Day of every Time and recurrence No end date End by: Recurrence: By trigger Options Report options Prompt values Select the frequency by clicking on a link. Specify the name of the trigger for this entry. Trigger name This entry does not have a schedule. The frequency and time have been reset to default because the event triggering this schedule has been removed. The schedule must be saved to become valid. Daily Frequency: Daily Frequency entry Daily Frequency start time Daily Frequency end time Enable Intra-day frequency. Once at: Every: Between: And: Every between and Interval hours Interval minutes Interval am/pm indicator Start year entry field End year entry field Hours Minutes AM/PM indicator Schedule start time Schedule end time Interval. Interval units. Start date dialog End date dialog

Edit the signon and select the users, groups, and roles that can use it. Signon: Edit the signon... Enter the signon - Enter the signon Enter the user ID and password for the signon. Enter the cube password for the signon.

Specify access permissions for this entry. By default, an entry acquires its access permissions from a parent. You can override those permissions with the permissions set explicitly for this entry. Override the access permissions acquired from the parent entry Specify access permissions for this root entry. You can either retain its default access permissions or override them with the permissions set explicitly for this entry. The execute permissions control access to the functionality associated with this entry. Override the default access permissions Grant Deny Set access permissions Option Permissions Read Read Denied Read Granted Write Write Denied Write Granted Execute Execute Denied Execute Granted Set Policy Set Policy Denied Set Policy Granted Traverse Traverse Denied Traverse Granted Checkbox unchecked Checkbox checked Checkbox mixed-value Delete the access permissions of all child entries Select this option if you want to override the existing access permissions of all child entries.

Specify the configuration settings for this entry. By default, an entry acquires its configuration settings from a parent. You can override those settings with the settings set explicitly for this entry. Category Name Value Acquired Yes No Reset to parent value Option Delete the configuration settings of all child entries Parameter All Logging Presentation Report Environment Security Notification [none] Tick(s) Millisecond(s) Second(s) Minute(s) Hour(s) Day(s) Bytes KB MB GB Data type not supported () Default Override default value Reset to default value Data Access Category: Select the option if you want to override the existing configuration settings of all child entries. Edit... Edit for ... Unlimited <Number> Select to enter a number or to set 'Unlimited'

Scope: The scope specifies where the drill-through links are available in the source reports. For example, if you select Countries and Regions as the scope, in every source report that includes Countries and Regions, users can access links for Countries and Regions and all query items within Countries and Regions. Target: Action: Format: (Default) Specify a label... Select a query item... Set the scope... Select the target... None None Unavailable Please select a target. Entire package Item: Item '' Select an item: Select another item: Name Type Required Multi-select Value Set the scope Select the item to define the source scope. Select an item Select an item - Select the item to use as the prompt value. Select the query item to use as the bookmark reference. Select the target and scope for the drill-through definition. Target settings Bookmark references Bookmark references edit Select the type of information you want to pass as a bookmark reference to the target report. Source type: Label: Label Query item: Query item Prompt values: Values set in the Value column will be passed to the target prompts when the drill-through action occurs. If the values in the table below are disabled, nothing will be passed. Number Text Date Duration Connection None The prompt parameters that you specified will be ignored because you selected to view the most recent report. To use the prompt parameters, select to run the report. Click OK to continue, or click Cancel to select different options.

Personal Portal Tabs

Details List Number of entries in list view: Specify your settings. Product language: Content language: Use the default language Use the following language: Default view: Number of columns in details view: Show the Welcome page at startup Enable bidirectional support Base text direction for content: Left-to-right Right-to-left Contextual columns Separators in list view: Grid lines Alternating backgrounds No separator Select skin... Report format: Show the Welcome page Show hidden entries Show a summary of the run options Enable accessibility support for reports I run or schedule Regional options Portal Alerts Specify the email address to use for your alerts about new versions. Your alert email is empty. Would you like to set your alert email address to the email address of your primary logon? Your alert email address is different from the email address of your primary logon. Would you like to reset your alert email address to the email address of your primary logon? Alert email warning. Credentials Specify the users, groups or roles that can use the credentials to run activities. You can also renew the credentials. Renew the credentials First, you must create the credentials. Time zone: Use the default time zone Use the following time zone: Daylight saving time in effect Time Style: Use the default time format: Use the following time format: Your credential has been renewed with your Log On user ID and password. Your email address has been removed from the alert list of all agents and agent views. Personalized pages: Show the default Welcome page Customized Default Delete all Delete all your personalized pages? (Default) Home: User's custom home Style: Preview Use the accessibility option Data source credentials

View the summary of your authentication information and manage your credentials. You can also view the groups and roles whose access permissions you have in this session and the capabilities available to you. Primary logon The primary logon represents the namespace that you first logged on to in this session and the credentials that you used. Namespace: User ID: Given name: Surname: Email: Secondary logons The secondary logons represent the namespaces that you subsequently logged on to in this session and the credentials that you used. Groups and roles Capabilities Namespace User ID Name Type Your alert email address is different from the email address of your primary logon. Would you like to reset your alert email address to the email address of your primary logon? The email address entered for alerts is invalid. The email address format must conform to the RFC standard.

Select the entries to include as tabs in your portal. Select the entries to include as tabs in the portal. Modify the sequence of tabs Specify the order you want your tabs to follow. Modify the sequence... Add the user's personal folders Add User's personal folders Add... Tabs:

Specify the printer settings for this entry. Network address: Model: Location:

Specify the user interface profile settings for this entry. Data:

Specify the paper size settings for this entry. Width: Height: Unit: On creation, grant read permission to the user group 'Everyone'

File system root location: The file system root location is set in IBM Cognos Configuration. No value has been saved for this parameter. File system location: Type a URI address that refers to a location contained within the File System Root location.

Versions Version: Manage versions... Manage report output versions - Manage document versions - To delete versions, select them and click Delete. View document output versions - View report output versions - View report output versions - Select a document version to view by clicking on a Format hyperlink. Current From: . To: . Archived versions Version Date range: Connection: Versions grid Outputs grid Versions grid Outputs grid Select an output version to view by selecting a date range and clicking on the desired version of the ouput and then clicking on the Format hyperlink Select date range... Select date range Date period type None None Version: Double-click to select an output version and then select the format Select an output version to view by clicking on a Format hyperlink. To delete output versions, select them and click Delete. Languages (All languages) Formats There are no saved versions. There are no saved outputs. There are no saved outputs for the run history As of time The selected versions cannot be deleted because a document must contain at least one version. To delete all versions, delete the document. Select date period Select a date or date range of time for the output versions You do not have sufficient privileges to view archived outputs.

Page Viewer - Portlet Viewer -

User ID: Password: Confirm password: Server name: Server URL: Server Name: Server URL: Administration Host: Host: Port: Use SSL Service Root URI: URL: Client URI: Schema (Optional): Show Connection String Authentication Type: Key: Value: Confirm Value: Site: Consumer Key: Consumer Secret: Confirm Consumer Secret: Temporary Token Endpoint: Authorization Endpoint: Token Endpoint: Client ID: Client Secret: Confirm Client Secret: Scope: None API Key Basic OAuth 1.0 OAuth 2.0 HTTP Method: GET POST HTTP Mime Type HTTP Message Body (optional): JSON Path Expression (optional): Assembly IBM Cognos Now! - Real-time Monitoring Cube connection string: Root path: Relative path of a folder in the repository where all the older report versions are saved. Port number: Provider String: Database name: Master Application name: DB2 database name: DB2 connect string: Connection string: ODBC data source: ODBC connect string: Open asynchronously Trusted context Identity Propagation - Registry Name Unicode ODBC User prompts: Select whether a user ID and password is required in the connection string and, if so, whether to create a signon. Select whether a user ID and password is required in the connection string. Select the type of authentication to use, and whether to create a signon. Select the type of authentication to use, and whether to create a signon. Select the type of authentication to use, and whether to create a signon. Select the type of authentication to use, and whether to create a signon. Optional parameters Select an authentication method. Select the type of authentication to use, whether a password is required and whether to create a signon. Select whether or not authentication is needed, and if so, the type of authentication to use, whether a password is required and whether to create a signon. Select the type of authentication to use, whether a password is required and whether to create a signon. Indicate the namespace to use for the authentication. No authentication Integrated Security Proxy host Create a Proxy Host signon No proxy host set Proxy host set All applicable namespaces (including unsecured PowerCubes) Restrict PowerCube authentication to a single namespace IBM Cognos software service credentials Select whether to create a signon. Select the authentication type Changing the Signon type from 'The signons of this connection' will result in the removal of all signons associated with this connection. Click OK to continue. User ID Password Timeouts Connect time: Reply time: SQL*Net connect string: Collation sequence: Optional Connection Parameters: These optional parameters are appended to the connection string and are database client specific. MARS Connection: YES NO Planning Administration Domain (PAD ID): Location Specify the location of the cube on a Windows operating system. If the cube also resides on a Unix or Linux operating system, enter its location. Windows location: Unix or Linux location: Read cache size (MB): Oracle Essbase: Server name: Database name: Master Specify a database name Application name: Packet size: Asynchronous level: 0 1 2 3 Polling time slice: Named instance: Informix database name: Host name: Server name: Service: SQLEXEC SQLTURBO Specify a service Server name: System number: Gateway host: Gateway service: Destination: Client: Language: Enable outer join handling by SAP ECC: ON OFF Dictionary Specify the location of the dictionary if you want to limit the tables accessed to a specific list. Dictionary location: Run in background Collation sequence: SAP logon type: Destination Application server Message server Destination: Application server: Message server: SAP server code page: SAP CP 1100: Western European ( ISO 8859-1: Latin-1) SAP CP 1160: Western European (Windows-1252: Latin-1) SAP CP 1401: Central and Eastern European (ISO 8859-2: Latin-2) SAP CP 1404: Central and Eastern European (Windows-1250: Latin-2) SAP CP 1610: Turkish (ISO 8859-9) SAP CP 1614: Turkish (Windows-1254) SAP CP 1700: Greek (ISO 8859-7) SAP CP 1704: Greek (Windows-1253) SAP CP 1800: Hebrew (ISO 8859-8) SAP CP 8000: Japanese (Shift-JIS) SAP CP 8300: Traditional Chinese (Big5) SAP CP 8400: Simplified Chinese (GB2312) SAP CP 8500: Korean (KSC5601) SAP CP 8600: Thai (Windows-874) SAP CP 4102: Unicode (UTF-16 Big Endian) SAP CP 4103: Unicode (UTF-16 Little Endian) SAP CP 4110: Unicode (UTF-8) System number: System ID: Logon group: Client number: SAP router string: Application server: SAP Router string: System number: Language: Maximum connections in pool: Table read function: Table row count: ABAP Query DB Access limit: Use Load balancing Message server: System ID: Logon Group: URL: Concurrent calls limit: User concurrent calls limit: Connection timeout(Sec): Query batch size: Maximum retries: Wait between retries(Sec): Proxy Enabled Proxy Host: Proxy Port: Proxy UserName: Proxy Password: User REST API to connect to Salesforce Client ID: Client Secret: Gateway name server: Gateway Port: Siebel Enterprise Name: Application Object Manager: Language: Siebel Repository: Library: CodePage: Transport: Compression: Encryption: Login Retries: Login Retry Delay(Sec): Maximum records: View mode: Search only within the primary child record for Multi valued fields Advanced Parameters: Local Sort: Collation Level: CharSet: Specify the time in seconds, in which you want the database to connect or wait for your reply before timing out. Signons Signon Create a signon that the Everyone group can use: An external namespace: External namespace: Transform user identifier The signons of this connection Authentication: Proxy Host: An external namespace (). JDBC URL: Repository CMIS URL: Specify the URL to a CMIS server. Driver class name: Connection string: Connection properties: Local Sort Options Collation Sequence: Level: Primary Secondary Tertiary Identical Connection type: Service ID TNS Names Alias Oracle Net Descriptor Driver type: Thin OCI Oracle Net Descriptor: Oracle Service ID: TNS Name: Instance Name: Login Time Out: Repository Connection Parameters: JDBC Connection Parameters: These optional parameters are appended to the URL and are specific to the driver. Compatible ODBC OLEDB CLI Native OCI JDBC Enable JDBC connection

Select a package Select which package to use.

Select a printer for your reports. Select a printer - Network address Model Location Please select a printer. New printer... New Printer wizard

Log on Log On to IBM Cognos Software Renew the credentials Log On The logon failed.

Select a Connection Select a Signon

Log off You are logged off. Open a session as an anonymous user Log on again... Cannot redirect upon logoff. Domain name validation for the URL: has failed. Please contact your administrator.

Save As Save as a copy Save as: Report view of this report Copy of this report Document

Address Specifies your personal address details. Street: City: State/Province: ZIP/Postal code: Country or region:

More... More actions for Available actions: Specific actions: Move... Move this entry to a different location Copy... Copy this entry Create a shortcut to this entry... Create a shortcut to this entry Delete Delete this entry View most recent document View most recent document in View most recent report in View most recent report View the report View the output versions for this report View the output versions for this document View run history Clear the cache Add me to the notification list Remove me from the notification list Run with options... Run with options Run in PDF Run the report in PDF format Run in PDF and prompt Run the report in PDF format and prompt for values Run the agent Open with Cognos Workspace Advanced Open with Report Studio Open with Query Studio Open with Analysis Studio Open with Event Studio Open with Series 7 PowerPlay Web Open with PowerPlay Studio Open with Series 7 PowerPlay Web in design mode Open with PowerPlay Studio in design mode Edit package... Edit package Schedule New schedule... Modify the schedule... Remove the schedule New schedule Modify the schedule Remove the schedule Edit schedule Open folder and view contents View folder contents Deployment records Open package and view contents View package contents View metric package contents Open with Metric Studio View planning package contents View analytics package contents Open with Adaptive Analytics Open with Contributor View this page View this portlet Add to my portal tabs View the deployment history Copy of Report View of Agent View of Data Movement View of PowerPlay View of Source actions... Set as active by default Create a report view of this report... Create an agent view of this agent... Create a data movement view of this data movement... Create a PowerPlay view of this report... Create a report view of this report Create an agent view of this agent Create a data movement view of this data movement Create a PowerPlay report view of this report View the URL Set members... Set personal properties... Set the personal properties for this user Set the personal properties for this contact Set portal tabs... Set the portal tabs for this user Set the portal tabs for this contact Set preferences... Delete this user's profile Copy this user's profile... Set the preferences for this user Delete this user's profile Copy this user's profile Set the preferences for this contact View report output versions View document versions View run history Clear the cache Add me to the alert list Remove me from the alert list Remove all from the alert list Alert me about new versions Do not alert me about new versions Do not alert any about new versions View the connections for this data source Create a package Create a package for this datasource Create a Metric package Create a Metric package for this datasource View connections View the signons for this connection View signons Open namespace and view contents View namespace contents View the portlets for this portlet group View portlets View the properties View my capabilities View my permissions View the package data sources Set as active by default View the schedule Set the members for this role Set the members for this group Set the members for this distribution list Unregister the dispatcher Start the service Activate the content manager service Stop the service immediately Stop the service after running and queued requests are processed Refresh Report Service Connections - Export using this deployment specification Import using this deployment specification View the run history for this deployment specification Run once Run the schedule once... Delete My Folders content for this user (1 entry) ( entries) Are you sure you want to delete the user's profile? Are you sure you want to be added to the alert list? Are you sure you want to clear the cache? Are you sure you want to be removed from the alert list? You cleared the '' checkbox. Click OK if you also want to remove all users from the alert list. This report will be sent to you by email every time a new version becomes available. All your alerts will be sent to ''. You can change this email address by changing your preferences. You will no longer be alerted when new versions of this report become available. Users will no longer be alerted when new versions of this report become available. You cleared the '' checkbox. Click OK if you also want to remove all users from the alert list. Preview this style... Preview this style View and customize this portlet... Lock portlet settings Unlock portlet settings View and customize this portlet New portlet New Migration Edit the registration... Edit the registration Edit the producer... Edit the producer Add a portlet from the producer... Add a portlet from the producer View drill-through definitions Open with Metric Studio View metric package contents Open the Analytics TOC View analytics package contents Open with Contributor View planning package contents View most recent event list View the event list View the most recent event list - View the event list - New package configuration... Modify the package configuration... Remove the package configuration Are you sure you want to remove the package configuration? Update the metric export... Update the metric export Package Configuration of Run activity View account contents View role contents View group contents Add to bookmarks... Add to bookmarks View capability contents Enable the rule Disable the rule Are you sure you want to enable this rule? Are you sure you want to disable this rule? Open this workspace Open this workspace - Open this workspace View remote contents Edit with Advisor Open with Cognos Insight

Import data Edit Data Set - Edit Data Set Upload a delimited text or Excel file to import its data into the repository. Modify the metadata as needed before publishing a package. You can make metadata changes to your data set's package, or replace the data by uploading another delimited text or Excel file. Select a data source Select a data source to be used as the My Data Sets repository. Data source: Name A list of My Data Sets repositories. Select one to be used for this data set. File upload Column name search box Metadata pane Metadata table Data preview pane Command buttons

Deploy your data from one environment to another and monitor the consistency of your data. - Content Administration IBM Cognos Administration My Preferences My Data Sets My Activities and Schedules Report Studio Metric Studio Query Studio Event Studio Analysis Studio PowerPlay Studio Log On Log Off Directory You are about to delete a namespace. This operation will delete My Folders content for all users in that namespace. Are you sure you want to delete the namespace ''? You cannot access this functionality because you do not have the required capability. Please contact your administrator. Capabilities Portal Administration Manage your portlets and portal layout. Schedule Management Server Administration Running Stopped Stopping Standby Unknown Package Drill-through Definitions Locate the package where you want to create, edit, or delete a drill-through definition. View the drill-through definitions of this package. To create a new drill-through definition, click the New Drill-through Definition button on the toolbar. Unavailable Portlets Styles Adaptive Analytics Contributor Controller Cognos Workspace Cognos Workspace Advanced Advisor Cognos Insight

The metadata information cannot be displayed at this time. Please try again later or contact your administrator.

Email address:

Duplicate named found An object with the same name already exists. An object with name '' already exists. Available options: Rename this entry. Replace existing entry with this one. Are you sure you want to replace the selected entry? Details IBM Cognos Software Error dialog

You selected to run '' as follows: View the details of this agent after closing this dialog View the details of this job after closing this dialog View the details of this report after closing this dialog View the details of this import after closing this dialog View the details of this export after closing this dialog View the details of this content maintenance task after closing this dialog View the details of this index update after closing this dialog View the details of this metric import after closing this dialog View the details of this metric export after closing this dialog View the details of this metric maintenance after closing this dialog View the details of this data movement after closing this dialog View the details of this data movement view after closing this dialog View the details of this query service administration task after closing this dialog View the details of this migration after closing this dialog - now when successful when failed Print the report: Print the reports: Click OK to submit the report or click Cancel to return to your selection. Click OK to submit the job or click Cancel to return to your selection. Click OK to run the content maintenance or click Cancel to return to your selection. Click OK to run the index update or click Cancel to return to your selection. Click OK to run the import or click Cancel to return to your selection. Click OK to run the export or click Cancel to return to your selection. Click OK to submit the metric import or click Cancel to return to your selection. Click OK to submit the metric maintenance or click Cancel to return to your selection. Click OK to submit the metric export task or click Cancel to return to your selection. Click OK to submit the data movement or click Cancel to return to your selection. Click OK to submit the data movement view or click Cancel to return to your selection. Click OK to submit the migration or click Cancel to return to your selection. Click OK to submit the planning macro or click Cancel to return to your selection. Click OK to submit the planning task or click Cancel to return to your selection. Click OK to submit the query service administration task or click Cancel to return to your selection. Click OK to submit the agent or click Cancel to return to your selection. Show this dialog in the future You selected to run the steps as follows: Step :

Set the PDF options - Specify the orientation and paper size to use for PDF reports. You can also specify that passwords are needed to open PDF reports, use PDF options or both. Access control Requires a password to open the report Requires a password to access options Allow printing: None Low-level Representation High-level Representation Allow changes: Modify the document's content Add or modify text annotations Fill in forms and sign the document Assemble the document (insert, delete or rotate pages and create navigation elements) Allow content extraction: Extract text for screen reader devices Copy of text, images, and other content You selected to specify a password to open the report without entering a password. You selected to specify a password to access options without entering a password. You specified a password to access options without allowing any options. Password to open reports Password to access options

Set the options when saving to a file system - Specify the name and location of the report on the file system and the action to take when saving a file that already exists. Name: Use the report name Specify a file name: Location: Conflict resolution: Keep existing files Replace existing files Make the file names unique and append a timestamp Make the file names unique and append a sequence number Name: . Use the report name Location: . Unavailable You must specify a file name.

Run HTML style HTML HTML fragment XHTML XML Excel 2000 Excel 2000 Single Sheet Excel 2002 Excel 2007 Excel 2007 enabled for Office Connection Delimited text (CSV) PDF PDF ( ) PDF () Orientation: Default (Default) Portrait Landscape Paper size: Delivery: Delivery methods Prompt values: Languages: Specify the languages: No values saved Prompt values saved Formats: Now and wait for the report Select the languages... Time: Set... Set prompt values View all Edit... Clear Edit prompts... Clear prompts The report does not contain prompts. Please wait while the system checks for prompts. Report prompt page. Please wait until the page is loaded before clicking Run. Save: Print the report Print the report Print the reports Printer location: Print the report: Save to the file system Edit the file system options... Edit the save options... Save the reports Refresh the report cache Produce report outputs Save the report Save the reports: Save the report: Save the report as a report view Save the report as report view: Select a printer... Edit the email options... Select the recipients... Enable attachment of the report in email tasks Number of rows per Web page: Number of columns per Web page: Run with options - Run with advanced options - Run the schedule once - Select how you want to run and receive your report. Select how you want to run and receive your report. If you produce a single report output, you can view it. If you produce multiple report outputs, you can save them, print them, or send an email notification. Select how you want to run and receive your report. You can view the report now in a selected format and language. You can run the report in the background and select multiple formats, languages, and delivery methods. Specify when you want to run this schedule. By default, the schedule options are used. You can override these options for this run, without changing any of the saved schedule options. Specify when you want to run this schedule. Specify when you want to run this schedule. Specify when you want to run this schedule. By default, the schedule options are used. You can override these options for this run, without changing any of the saved schedule options. Select how you want to run and receive your reports. Specify when you want to run this . Specify when you want to run this import. Specify when you want to run this export. Attachments Send a notification by email that the reports are complete Send a notification by email that the report is complete Send the report to mobile recipients Send the reports to mobile recipients () recipients 1 recipient Unavailable 0 recipients Unavailable Send the report by email Send the reports by email Send a link to the report by email Send a link to the reports by email Send the reports and a link to the reports by email Send the report and a link to the report by email Send a notification by email that the reports are complete: Send a notification by email that the report is complete: Send the reports by email: Send the report by email: Send a link to the reports by email: Send a link to the report by email: Send the reports and a link to the reports by email: Send the report and a link to the report by email: recipients 1 recipient 0 recipients Unavailable Unavailable recipient The email contains recipients that cannot be displayed. They may have been deleted or you may not have sufficient privileges to see them. Bursting: Specify bursting Specify notification Burst the report Burst the reports Parallel: Default Parallel: Enabled Parallel: Disabled Query prefetching: Default Query prefetching: Enabled Query prefetching: Disabled Key limit: Default Key limit: Key limit: Unlimited Enable alerts about new versions Enable comments in saved output versions Prompt values saved No prompt values saved Default Default options Run as the owner: Capabilities only Select at least one delivery method. For burst reports, the email recipients are determined by the burst specification. Select at least one delivery method. Select at least one delivery method. For burst reports, the email recipients are determined by the burst specification. advanced options To specify a time to run the report, or for additional formats, languages, or delivery options, use . View the report now Save the report Send me the report by email Send the report to my mobile device Save the report, print it, or send an email: Prompt for values Trigger Specify the name of the trigger for this entry. The entry, or one of its report views, must be scheduled to be triggered. When a trigger is removed, the associated schedules become incomplete and need to be updated. Trigger name: Trigger description: You selected to run the reports without selecting a format. Click OK if you want to add the format, or click Cancel to select different options. The report options include non-PDF formats but you only selected to print the reports in PDF format. Click OK to save the reports in the selected formats, or click Cancel to select different options. You selected multiple languages which will produce multiple reports. You cannot use the option View the reports now with multiple reports. Click OK to save the reports instead, or click Cancel to select different options. For burst reports, the email recipients are determined by the burst specifications. The recipients that you specified will not be added. You selected to print the reports without selecting a printer. You selected to save to the file system without selecting an archive location. You must save the reports before including a link to them in the email notification. Click OK to save the reports, or click Cancel to select different options. You must save or print the reports before sending an email notification that the reports are complete. Click OK to save the reports, or click Cancel to select different options. You must select at least one email recipient. You must select at least one mobile recipient. You must select at least one delivery method. Click OK to save the reports, or click Cancel to select different options. Between and Less than or equal to Greater than or equal to Your request to run has already been sent. Please wait while the system refreshes the page. Override run options... Report execution: Record report execution PDF options: No options saved Set... Set PDF options Edit... Clear Edit PDF options... Clear PDF options Enable selection-based interactivity Enable selection-based interactivity in HTML reports rows per page Number of rows per Web page in HTML reports: Enable Excel 2007 reports for Office Connection Accessibility: Burst options

View the saved prompt values - View the saved prompt values - - View the prompt values saved for this entry. Data sources Data source: . Connection: . Data source: . Connection: . Data source: . Connection: . Signon: . Signon: . User ID and password entered User ID entered Password entered No value has been saved for this parameter. -

Edit the time and delivery methods - Specify the time and delivery methods to use when this entry runs. Time and mode: Time: Now Later: View the report now Run in the background:

Job: Report:

Field contains invalid keyword values: Integer value expected. Integer value greater than or equal to zero expected. The value exceeds the maximum length for this field.

By Day By Week By Month By month frequency options By Year By Trigger Schedules Pending Waiting Executing Succeeded Failed Canceled Suspended with errors with warnings Name Status Priority Actions Information regarding the execution of the scheduled report. job Request time Start time Activity View and manage run activities. You can use the options to view entries that are completed and that are presently running. Schedule View and manage scheduled runs. All statuses Scheduled Completion time Are you sure you want to remove the schedule? Current filter: Filter options All Folders My Folders Public Folders Administration Entries I ran Entries I own Content: Status: Scope: Period: From: To: Day selection year Range selection starting year Range selection ending year Last hours Apply ...> The values specified in the 'From' and 'To' field are invalid. View parameters View outputs View steps View tasks View the event list Cancel execution Cancel execution - The event was canceled successfully. Remove schedule View the details of each step in the job execution. on-hold View the steps - View the tasks - There are no entries that match the applied filter. Unavailable Link to an entry... The run history no longer exists. It may have been deleted because it exceeded the retention period. Status All statuses Enabled Disabled Enable Disable Cancel execution Summary Total

Monitor Configure

Select a location Select the location where you want to place the entry. Root

Start Unregister Service Test Test the connection Test the dispatcher (All) Services Dispatchers Refresh Capacity Version Content Manager does not contain data for the specified dispatcher or service. View the services for this dispatcher View services Stop Uptime Message Processes Latency Seconds per request Requests per minute Update interval Type: Monitor and control your dispatchers and services. Changing the active Content Manager service may cause all authenticated users to be logged off. During the change period, requests may fail. Do you want to continue? Activate Create this user's profile Stop Immediately Stop After Running and Queue Processed Stop immediately Stop after running and queue processed Refresh the report service connections Refresh the report service connections View the results - View the results View the results - Test the connection

Copyright (C) Copyright IBM Corp. 2005, 2011 IBM Corp. Version: Date: - NOT FOR COMMERCIAL RELEASE OR SALE Licensed Material - Property of IBM Corp. IBM, the IBM logo, and Cognos are trademarks of IBM Corp., registered in many jurisdictions worldwide. This computer program is protected by copyright laws and international treaties. Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent under the law. Portions of this product may be protected by patents and/or patents pending in favor of IBM Corp. Refer to the copyright information.

Choose an entry to cut by selecting the check box for the entry. Choose an entry to copy by selecting the check box for the entry. You have selected too many entries for this operation. The maximum number of entries that can be selected is . Choose an entry by selecting the check box for the entry. Choose an entry by selecting the radio button for the entry. Choose an entry to delete by selecting the check box for the entry. Choose an entry to enable by selecting the check box for the entry. Choose an entry to disable by selecting the check box for the entry. Choose an entry to cancel by selecting the check box for the entry. There are no entries to paste. An entry with no schedule has been selected. Please deselect this entry. Are you sure you want to delete the selected entry? Are you sure you want to delete the selected entries? Delete My Folders content for the selected user? Are you sure you want to enable the selected entries? Are you sure you want to disable the selected entries? Are you sure you want to cancel the selected entries? Are you sure you want to unregister the selected dispatcher(s)? Are you sure you want to create this user's profile? You cannot use semi-colons (;) in the field ''. You must enter a URL that starts with "http://", "https://", "file://" or "file:///" You must enter an endpoint that starts with "http://" or "https://" The value entered must be of the format: <name>=<value>[<name>=<value>]... The value entered must be of the format '(DESCRIPTION=...)' or '(DESCRIPTION_LIST=...)'. It also cannot contain this character: '#'. A network address cannot contain any of the following characters: & ; $ * ? ` ^ { } | " < > You cannot delete dispatchers or configuration folders that contain entries. You cannot delete dispatchers. Click 'More...' to unregister them. You cannot delete configuration folders that contain entries. Deleting entries may result in broken links. Are you sure you want to delete the selected entries? Implicit configuration changes might result from this action. Do you want to continue?

You do not have 'Set Policy' permission. Access to the security permissions for this entry is denied. The passwords you typed do not match. Please retype the new password in both text boxes. The value entered is not a valid number. The URL entered is not valid. The value entered is not valid. The value must not contain a space. Task type is invalid. At least one retention setting must be specified. You can select Run history, Output versions or both. The value you entered is invalid. Please enter a positive number. The value entered is not valid. Type a whole number greater than 0. The value entered must have a length of ''. The value entered must have a length greater than '' and smaller than ''. The value entered must have a length greater than ''. The value entered must not exceed '' digits. The value entered must be an integer greater than '', and less than ''. The value entered must be a number greater than '', and less than ''. The value entered must be an integer greater than or equal to '', and less than ''. The value entered must be a number greater than or equal to '', and less than ''. The value entered must be an integer greater than '', and less than or equal to ''. The value entered must be a number greater than '', and less than or equal to ''. The value entered must be an integer greater than or equal to '', and less than or equal to ''. The value entered must be a number greater than or equal to '', and less than or equal to ''. The value entered must be an integer greater than or equal to ''. The value entered must be a number greater than or equal to ''. The value entered must be an integer greater than ''. The value entered must be a number greater than ''. The value entered must be an integer less than or equal to ''. The value entered must be a number less than or equal to ''. The value entered must be an integer less than ''. The value entered must be a number less than ''. The value entered is not valid. Type a whole number in the range '1' to '999'. The value entered is not a valid integer.

Changing the repository type will result in the loss of the current repository connection parameters. Changing the connection string type will result in the loss of the current connection string and removal of all signons associated with this connection. Click OK to continue. "The browser pop-up blocker is preventing your home page from launching in a new window. Click to continue. You can modify the pop-up blocker settings to go directly to your home page." Click to close this page or close the browser window. here

Welcome to IBM Cognos Software Metric Studio My Content My workspaces View your favorite Cognos Workspace or create a new one. Create a new Cognos Workspace. View your favorite Cognos Workspace. Create workspaces on the web Use Cognos Workspace to easily assemble business content into interactive and personalized workspaces. View my workspaces Use Cognos Workspace to view interactive and personalized workspaces. View a Cognos Workspace. Create workspaces on my computer Install Cognos Insight on your computer and use it to import and explore your own data in interactive desktop workspaces. Administration My Actions Use to monitor application activity, manage security and administer Cognos content. Use to create simple queries and reports. Use to create more advanced business reports. Detect and track business events through their life cycle with . Use to explore your organization's data. Use to analyze what's driving your business. Use to access your reports, metrics, news items and other Cognos content from workspaces and folders. Use to refine the reporting model and create reports and reporting packages. Use to plan, budget, forecast activities in real-time. Use to monitor your performance against your priorities with scorecards. Use to collect, consolidate and certify all financial information. Author advanced reports Author business reports Use Cognos Workspace Advanced to easily create business reports. Manage my events My home Go to your home page. Administer IBM Cognos content Manage my analytic content Query my data Analyze my business Explore my data IBM Cognos content Manage my metrics Plan and forecast Consolidate my financial information Show this page in the future THE NEXT LEVEL OF PERFORMANCE Licensed Material - Property of IBM Corp. IBM, the IBM logo, and Cognos are trademarks of IBM Corp., registered in many jurisdictions worldwide. My Inbox Use My Inbox to view and manage your tasks and notifications. My Data Sets Use My Data Sets to view and manage your personal data. Create a new workspace Favorites: List of favorite workspaces. The favorites dialog is closed. Press enter to open favorites dialog The favorites dialog is opened. Access my social network Access my social network using IBM Connections My Activities View and manage your activities using IBM Connections

Scope: Only entries that have changed All entries Select to index only entries that have changed since the last time the indices were updated or to rebuild the indices for all entries. Run options Content options: Select the information to collect for the chosen content Properties and metadata Data values Referenced data Modeled data All data You must select at least one content option. List of content to be included in the index List of content to be excluded from the index Add Included Content... Remove Included Content Add Excluded Content... Remove Excluded Content

Consistency check: You selected to specify the external namespaces against which to check references without selecting any namespaces. References to external namespaces: Internal references Select the type of consistency check. Mode: Find only Find and fix All namespaces (Active) (Inactive) New content maintenance wizard Selected namespaces: content maintenance task (Unavailable) Some of the selected namespaces cannot be displayed because they have been deleted. These selections will be deleted. Select the options to use for this entry. Select the options - Select the content - Check references to external namespace: Upgrade report specifications: Options: Consistency Check... Report Upgrade... Retention Rule Update... Content Archival... Content Removal... Dimensionally-modeled Relational... Oracle Essbase... Dynamic cube... SAP BW... Add... Remove Name Choose an entry to remove by selecting a check box. Add... Remove Name The index update specification contains entries that cannot be displayed. They may have been deleted or you may not have sufficient privileges to see them. Do you want to remove all unavailable entries from the index update specification? No packages or folders were selected. Please select at least one package or folder. Reports located in Reports located in Reports based on Reports based on You selected to upgrade report specifications for packages without indicating if the upgrade applies to the reports located in the packages or based on the packages. Report specifications based on packages: Report specifications in locations: Some of the selected packages or folders cannot be displayed. These selections will be deleted. Report upgrade: Select the packages and locations for which to upgrade report specifications to the latest version. Included content: Excluded content: Select the packages and folders that contain the entries to include in the index update. Retention settings Removal settings Included content Content in locations: . Unavailable Maintenance record Select the level of detail to save in the history record. Recording level: Maintenance record Recording level: . Basic Trace Minimal Request Trace Included content Name Add... Remove Choose an entry to remove by selecting a check box. Unavailable Content to archive Tenants: File: One for all tenants One per tenant Granularity: By object type and tenant All objects

Content: Configuration Directory Library Content store User account information Cognos namespace Public Content Tenant Content You selected to move all entries from the deprecated folders to the Administration folder. Do you want to continue? View the deployment records for this specification. Report Package Data Source Distribution List Contact Folder Messages Deployment messages Message Deployment archive Public folders, directory and library content Entries Action performed added replaced updated kept failed exported Status: No messages issued. No entries imported. No entries exported. Specify a deployment archive - Select a deployment archive - Select the tenants - Select the tenants whose content you want to export. Available: Selected: Include public content Do not include public content At least public content needs to be chosen or one or more tenants must be selected. Select from the existing deployment archives or type a new deployment archive name. Select whether to encrypt the content of the archive. Select the deployment archive from which to get the entries to import. If the archive is encrypted, you will be prompted to enter the encryption password. Deployment archive: Deployment archive The location of the deployment archive is set using the deployment files location in IBM Cognos Configuration. New: Existing: Name Please select a file. Please type a file name or select a file. A file name cannot contain any of the following characters: / : * ? < > | ! # $ % ^ " & The deployment specification refers to a deployment archive that does not exist. New archive: The deployment archive '' does not exist. Please select a deployment archive. Update Import wizard Update Export wizard Specify the target location and the multilingual target name - Specify the location for the entry and a name for each language to use in the target environment. Add a target name - Select a language and specify the name to use in the target environment, and click Add. When you are done adding entries, click OK. Source name: Target name: Choose a deployment method - Select the Content Store options - Choose a deployment method. Select the options for the import of the entire Content Store. Verify the list of tenants whose content you want to import. Specify the deployment archive name, and the options for the import of the entire Content Store. Specify the deployment archive name, and the options for the export of the entire Content Store. Deployment method: Content Store Tenants Select public folders, directory and library content Select tenants Select the entire Content Store Include user account information Do not include user account information Select the public folders, directory and library content - Select one or more packages, folders, directory or library content and select the options to include in the import. Select the packages, folders, directory or library content and select the options to include in the export. Name Tenant ID Name Target name Disable after import Disable after import for In target content In target specification Public folders, directory and library content Public folders, directory and library content available for import Public folders, directory and library content imported Change the target name of packages and folders if you do not want to overwrite them in the target with packages and folders from the deployment archive. Disable the packages or folders if you do not want users to access them in the target after the import. Some entries in this deployment are no longer in the content store and will be removed when saved. Select the directory content - In case of conflict when carrying over IDs from another environment, the existing IDs are overwritten which can result in lost information and broken existing external links. Select the directory content and options to include in the import. Select the directory content and options to include in the export. Directory content Include Cognos groups and roles Include distribution lists and contacts Include data sources and connections Include signons Include references to external namespaces Do not include references to external namespaces External namespaces Replace existing entries Members: Conflict resolution: Keep existing entries Do not assign new IDs during import Assign new IDs during import Store IDs: Selecting 'Do not assign new IDs during import' could result in content being overwritten and lost. The owner from the source The user performing the import Set the owner to the owner from the source Set the owner to the user performing the import Entry ownership Minimal Basic Trace Deployment record Select the level of detail to save in the deployment record. Recording level: Apply to: Set the owner to: Specify the general options - Specify the options applicable to all the entries in the export. Specify the options applicable to all the entries in the import. You can also select the options applicable to the deployment record. Review the summary - The Export wizard is ready to export to the deployment archive. If you want to change any settings, click Back. Save Only The Import wizard is ready to import into the target environment. If you want to change any settings, click Back. If you are satisfied with the settings and want to select whether to run, schedule, or save only, click Next. Include report output versions Include uploaded data Include Cognos groups and roles Do not include Cognos groups and roles Include distribution lists and contacts Do not include distribution lists and contacts Include data sources and connections Do not include data sources and connections Include signons The deployment archive must be encrypted because the export contains sensitive data. Click the link to enter the encryption password. You did not select any content. Click OK to continue the export or Cancel to return to your selection. The deployment archive is empty. Click OK to continue the import or Cancel to return to your selection. One or more target locations for this deployment do not exist. Click OK to continue the import or Cancel to return to your selection. The deployment archive must be encrypted because the export contains sensitive data. Click the link Change the deployment archive... and then set the encryption password. Do not include signons Include references to external namespaces Do not include references to external namespaces Include access permissions Do not include access permissions Replace existing entries Keep existing entries Public folders, directory and library content Deployment specification Deployment archive Name: Public folders, directory and library content to be imported Public folders, directory and library content to be exported No tenants selected No public folders, directory or library content selected The import is running. You can wait until the import completes or close the wizard and view the deployment history after the import is completed. The export is running. You can wait until the export completes or close the wizard and view the deployment history after the export is completed. Finish - Report specification upgrade: Run options Report specification upgrade: Upgrade all report specifications to the latest version Keep the existing report specification versions You may want to keep existing report specification versions for compatibility with existing applications. Select the run options - Specify how you want to run this . The Import wizard successfully submitted the import. The Export wizard successfully submitted the export. Click Finish to close the wizard. import export View the details of this after closing the wizard Error - The Import wizard completed the import with errors. The Export wizard completed the export with errors. Select a deployment specification to use for importing. To create a new deployment specification, click the New Import button on the toolbar. To import using an existing deployment specification, click the Update Import button beside the specification that you want to use. A deployment specification defines the entries to move from the source to the target, the deployment options, and the deployment archive in which to get the entries to import. Select a deployment specification to use for exporting. To create a new deployment specification, click the New Export button on the toolbar. To export using an existing deployment specification, click the Update Export button beside the specification that you want to use. A deployment specification defines the entries to move from the source to the target, the deployment options, and the deployment archive in which to store the entries to export. Deployment history: Specify the deployment options for this entry. Specify the deployment options for this entry. Change the deployment archive... Select a new deployment archive Enter the encryption password View an import deployment record - View an export deployment record - Account Schedule Report View Query Namespace Namespace Folder View the deployment history - View the deployment history - Options Options: Include report output versions Include uploaded data Include run history Include schedules General Options Access permissions Apply to new entries only New entries only Apply to new and existing entries New and existing entries Include access permissions Include run history Include schedules Do not include report output versions Do not include uploaded data Do not include run history Do not include schedules Advanced options Assign new IDs during import Do not assign new IDs during import The password entered is invalid. The password length must be 8 or more characters. The password entered is invalid. Encryption: Encryption The name you entered already exists. Please enter a new name. You can encrypt the content of the archive by setting a password. This password is required to decrypt the archive during import. If the archive was encrypted during export, enter the password to decrypt it. Checkbox checked Encrypt the content of the archive Set the encryption password... Edit the encryption password... Clear the encryption password Encrypt the content of the archive Do not encrypt the content of the archive Enter the encryption password - Edit target for Target location "" does not exist

Steps Steps: All at once In sequence Continue on error Defaults for all steps: Run history details level: Select the level of details to save in the run history when the run activity completes successfully. For failed runs, the details are saved. All Limited Clear Edit... Edit the step options... Edit the step options for ... Set... Submission of steps: Modify the sequence... Options and prompt values Prompt values Select the entries to include as steps of this job and the options to use when this entry runs. Set... Edit... Clear Submitting steps in sequence implies that a step is submitted only upon completion of the step before it. Navigate the folders or search to find reports, queries, report views, and jobs to include in your job. Select the entries you want and click the Add button to update the Selected entries list. When you are done adding entries, click OK. Default (Default) Notify contact on success Notify contact on failure Select this option to specify default values for all steps of this job. No default values set This job contains steps referring to entries that cannot be located. Do you want to delete these steps? Details were not saved. The run history detail level option was set to "Limited". These options control the execution of burst reports. Changing the options can affect system performance. Click the Help button for more information. Run in parallel: Default Enabled Disabled Use query prefetching: Default Enabled Disabled Maximum key limit:

Specify the folders and entries to be shown at the beginning of the list and specify their display order. The default is to show them in ascending order by Name. Folders and entries whose display order is not specified or are added after the order is specified are shown at the end of the list in the default order. Sort - Folder order: Entry order: Up Down To top To bottom Set to default - ascending - descending Order folders and entries - Folders Entries Shown first: Shown in default order:

Select the default options to use for this entry. Specify the format: Specify the language: Specify the prompt values: Format: Language: IBM Cognos PowerPlay Studio options: Open in design mode Prompt values: Prompt for values Report options: Advanced options Advanced options panel Enable enhanced user features in saved output versions Default action: View most recent report Run the report Open with Refresh the report cache: Report cache: A report cache is used to optimize the performance of prompt pages. The cache is refreshed automatically when a report runs interactively and the cache is expired. You can also clear the cache at any time. . Clear now Cache duration: Cache duration units Day(s) Month(s) Enable accessibility support

This entry imports data from files into the metric staging area. Select the options to use when this entry runs. This entry imports data from a data source into the metric staging area. Select the options to use when this entry runs. This entry maintains the metric data store. Select the options to use when this entry runs. This entry exports data from the metric store to files. Select the options to use when this entry runs. Import data options: Import data from files Import data from the data source Transfer data from the staging area into the metric store Pre-import data options: Clear history data Clear calendar data Clear rejected data logs Clear audit history Post-import data options: Recalculate derived values Send emails from the watch list Update the index used for searching Metric data options: Clear data options: Additional options: Update user names with values from external namespaces Maintain the index used for searching: Update the index Rebuild the index used for searching Update the index used for searching Rebuild the index Export data options: Export data from the metric store Click to edit the specification.

Navigate the folders, search, or type the names of the users, groups, roles and namespaces to add. Select the entries you want and click Add. When you are done adding entries, click OK. Navigate the folders, search, or type the names of the users and groups to add. Select the entries you want and click Add. When you are done adding entries, click OK. Navigate the folders, search, or type the names of the users, groups and roles to add. Select the entries you want and click Add. When you are done adding entries, click OK. Navigate the folders, search, or type the names of the contacts, distribution lists, users, groups and roles to add. Select the entries you want and click Add. When you are done adding entries, click OK. All folders Method: Type the names: Type the names of the entries to add. Use semi-colons to separate the names and use the format 'namespace/[account|group|role];'. For example, type 'Cognos/Everyone;'. Add entries - New distribution list New signon New group New role New job Select packages and locations - Select Entries Navigate the folders to find the packages, folders, and namespaces to include in the content maintenance task. Select the entries you want and click the Add button to update the Selected entries list. Navigate the folders to find the packages and folders to include in the index update task. Select the entries you want and click the Add button to update the Selected entries list. Select Public folders, packages and folders - Navigate the Public Folders to find the packages and folders. Select the entries you want and click the Add button to update the Selected entries list. My Folders of Select dynamic cube data sources - Select the entries you want and click the Add button to update the Selected entries list. Multiple selection dialog

You must select at least one language. Select the languages - Select the languages - - In the Available languages list, select the languages you want to use and then click the arrow buttons to update the Selected languages list. The Selected languages list must contain at least one language. Available languages: Selected languages: Add Add all Remove Remove all

Users, Groups, and Roles Data Sources Distribution Lists and Contacts Printers Active (Active) (Inactive)

Select default options - Select the default options for all the steps of this job. Override: Specify the formats: Report options Content maintenance task options Index update options Import options Select the step-level run options - - Select the run options to use for this step. Select the run options to use for this step. You can run this step to produce report outputs or to refresh the report cache to optimize the performance of prompt pages. Select the run options to use for this step. Select the agent options - - Select the report options - - Select the report options - - Select the content maintenance task options - - Select the import options - - Select the run options to use for this step. Select the index update options - - Select the run options to use for this step. Run the report to: Produce report outputs Refresh the report cache Override the default values Override the default report options Override the default prompt values Specify default values for all the reports of this job Specify default values for all the content maintenance tasks of this job Specify default values for all the index updates of this job Specify default values for the imports of this job

Select portlets (Navigate) - Select portlets (Search) - Select portlets (Navigate) Select portlets (Search) Navigate the folders or search to find the portlets to include in your page. Select the entries you want and click the Add button to update the Selected entries list. Set columns and layout - Layout options: Allow specified column width to dynamically adjust to content width. Specify number of columns and layout the portlets that you have chosen. To customize the portlet, view the page once you close this wizard. Swap columns Set page style - Add a title and instructions which appear above the portlets on the page. You can also set the style of all portlets on the page. Title and Instructions The title and instructions are shown for the selected language. Title: Hide title on the page Instructions: Hide instructions on the page Portlet Style Hide borders Hide title bars Hide Edit buttons on the title bar Remove values for this language Return to default Custom Select an action - The New Page wizard is ready to create the page you specified. You can add this page to your portal tabs and view it once the wizard closes. Action after closing the wizard: Add this page to the portal tabs View the page Bold Italic Underline Colour Align left Align right Center Justify New Page (unavailable) Content Number of columns: 1 column 2 columns 3 columns Content For each column you can set the column width and re-order the portlets. When there is more than one column, you can move portlets from one column to the other and swap between columns. Move item(s) right Move item(s) left Move all items right Move all items left Move column right Move column left Column width: This page was edited with a newer version of the page editor. The page layout will be downgraded to make it compatible with this version of the page editor. This page was edited with a newer version of the page editor. It cannot be edited using this editor.

Select the contact - Type an email address, navigate the folders or search to find the user, group, role, contact, or distribution list to use as a contact for this entry. Type an email address: Search... Navigate...

Modify the sequence of steps - ()

Select a user, group or role Navigate the folders or search to find the user, group, or role for this entry.

Description Default Value Maximum Minimum Data Type unlimited Numeric String

IBM Cognos Viewer Your report is running. Instead of waiting, you can set it to run in the background and save the output for later use. No output available. The report will be saved in the following location: Run again Please wait... Page down Page up Top Bottom Select the report Available reports: Close Return About Cancel Name

Rerun - Select the event and you want to rerun and click OK to rerun them. Select the steps you want to rerun and click OK to rerun them. tasks steps Event and : Steps: You must select at least one entry to rerun.

View run history - View the run history for this entry. Status: Succeeded Failed Executing Unknown Pending Canceled Scheduled Suspended Waiting Options: Unavailable Events Detected: Report outputs: Yes No The run history no longer exists. It may have been deleted because it exceeded the retention period. View the details of this particular run. Severity: (All) Warning Information Error Fatal Debug Start time: Time Message List of history detail messages Completion time: Event and tasks: Tasks: Tasks: Namespaces: Content maintenance task Index update Metric import from files Metric import from data source Metric export Metric maintenance The deployment archive cannot be found. View deployment record from View run history details from View run history details - View run history details View the log file View the parent entry This run is part of a rerun series and you can view the details of the series under Related runs. Outstanding to complete View the event and that did not end successfully. The list includes the event and from this run and from other runs in the series. View the steps that did not end successfully. The list includes the steps from this run and from other runs in the series. View the steps that did not end successfully. The list includes the steps from this run and from other runs in the series. View the event and that did not end successfully. The list includes the event and from this run and from other runs in the series. Rerun... Rerun the event and tasks Rerun the steps Related runs View all the runs that are part of the rerun series. Some runs may have been deleted due to retention. The run you are viewing is in bold. You selected to rerun ''. Do you want to continue? Only progress information is currently available. The information will be updated following the completion of the parent activity. (Current run)

View future activities Some of the selected entries are already scheduled. Some of the selected entries are already canceled. View the activities that are scheduled to run in the future. Day: View future activities There are no entries that match the applied filter.

Define paper sizes Define the paper sizes that can be used when setting up report pages. Height Width Unit inches centimeters New... Delete Modify the display order...

Define file system locations Specify a name and the URI for the location on the file system for this entry. You can also specify a description and a screen tip. Location New... Delete

Set advanced settings - Specify the advanced configuration settings for this entry. By default, an entry acquires its advanced settings from a parent. You can override those settings with the settings defined explicitly for this entry. Parameter Value Override the settings acquired from the parent entry Delete

- By default, an entry acquires its '' settings from the system. You can override those settings by explicitly defining them below. Default: Disable Make mandatory Allow the user to decide Selected Not selected

Set dynamic cube configurations - Specify the dynamic cube configurations. Set properties - Specify the properties for this entry. Data source Properties Name Value and New configuration... Delete Edit configuration... Edit the configuration for ... Reset to default Data cache size limit (MB) Specifies the maximum size, in MB, of the data cache for the cube. Data source name Specifies the name of the dynamic cube data source to be configured. Enabled Disabled Specifies whether the cube is disabled. Disable in-database aggregates Specifies whether external aggregate support is disabled. Enable workload logging Specifies whether workload logging for the aggregate advisor is enabled. Disable result set cache Specifies whether the result set cache is disabled. Percentage of members in a level that will be referenced in a filter predicate Specifies the percentage of members in a level that will be referenced in a filter predicate. A reference to the containing level will be used in the filter predicate if the percentage of members in the level referenced by the filter predicate exceeds the value specified by this property. A value of zero means that no limit is applied. Startup trigger name Specifies the trigger event that is sent once the cube has started. Post in memory trigger name Specifies the trigger event that is sent once the in-memory aggregates have been loaded. Maximum amount of disk space to use for result set cache (MB) Specifies the maximum amount of disk space to use for result set cache (MB). The value must be equal to or greater than 100. Maximum space for in-memory aggregates (MB) Specifies the maximum amount of memory to use for in-memory aggregate cache (MB). The value must be equal to or greater than 0. Maximum in-memory aggregates to load in parallel This property specifies the maximum number of in-memory aggregates to load in parallel. Specify a value of 0 for the engine to automatically determine the number of threads to be 2 * number of CPU cores Maximum hierarchies to load in parallel This property specifies the maximum number of hierarchies to load in parallel for cube start and member cache refresh. Specify a value of 0 for the engine to automatically determine the number of threads to be 2 * number of CPU cores. Measures threshold Applies to retrieving measure data. If there is a greater percentage retrieved than what is specified in this field, then the SQL query generated retrieves all measures (a speculative pre-fetch of data). Calculated measures, non-visible measures, and semi-aggregate measures are not included. The value must be between 0 and 100. Automatic optimization of in-memory aggregates Controls the automatic optimization of in-memory aggregates for the cube on this server. If the value is set to automatic aggregate optimization on, then the software will automatically adjust the set of in-memory aggregates that are loaded while the cube is running. The value entered cannot be empty. The value entered is not a number. The value entered is not within the range. Some data source names are present more than once. Duplicate entries will be eliminated. You must specify a value for [] if you want automatic optimization of in-memory aggregates.

Set JMX proxy host dispatchers - Specify the JMX proxy host dispatchers. Add... Delete Dispatcher Some dispatchers are present more than once. Duplicate entries will be eliminated. Select JMX proxy host dispatchers - Select the entries you want and click the Add button to update the Selected entries list.

Set gateway mappings - Map the external application gateway to the internal application gateway for this entry. By default, an entry acquires its gateway mappings from a parent. You can override the acquired settings with the settings defined explicitly for this entry. Application gateway (external) Application gateway (internal) Override the settings acquired from the parent entry Add a mapping Delete No mappings specified.

Preview the style - No preview is available for this style.

Connection to Series 7 failed. Failed to connect to :. Series 7 error:

Set the commands - Set the commands - unsupported command Use XML to specify the commands that the database executes for this event. The XML must validate against the schema for the data source commands.

Copy the user profile - Specify the target user and the settings to copy. Copy to this user's profile: None Select the target user... Profile settings: Preferences Portal tabs and personal folders content Personal folders content Option Select this option if you want to delete the source user once the copy completes. Delete the source user's profile after the copy completes Copy You must select a target user. You must select at least one profile setting to copy. () You selected to copy user "" to user "". Do you want to continue?

Go to Working. Select the target report to go to. Loading... You do not have sufficient privileges to go to the target report. Available links:

No tool name was provided. Launch parameter XML file was not found. You are not allowed to launch . The required parameter '' was not specified. Launch can not complete. You do not have read access to ''. The package is unavailable.

This is a Really Simple Syndication (RSS) feed from IBM Cognos Connection. RSS feeds allow you to stay up to date with the entries that you are interested in. To subscribe to this RSS feed, copy the URL and use it as the address of the RSS channel in the Cognos RSS Viewer portlet or your favorite reader.

The requested output can not be read. The next page cannot be displayed. Go to your home page

New Visualization Import Page Browse your file system and select visualizations that can be used in IBM Cognos reports. When your selections are complete, click import. Selected Visualizations: Remove selection (Succeeded) (Failed) Your selections were not imported. Do you want to continue? An error occured while importing the bundle.

IBM Cognos Go! Search results for (of about ) More results IBM Cognos

Portlet Title: Title of this portlet to be displayed in the portlet caption. Sample Booklet Viewer Include My pages tab Option to show or hide the "My Pages" tab in the tab bar. When selected, the "My Pages" tab will always be the first tab. Show Tab menu Option to turn on or off the display of the tab menu on the tab bar. Source folder: Determines a folder, from Public Folders, from which this booklet is to extract the contents of the page tabs Display Style: Indicates how tabs are to be displayed Horizontal tabs Vertical Tabs Banner portlet: This is an optional property allowing selecting a specific portlet to be the banner inside the booklet viewer. IBM Cognos software will have the Standard Banner portlet available for selection. But any portlet can serve as a banner Booklet View Options

This portlet cannot be displayed. It is not viewable within IBM Cognos Connection or in third-party portals. To view this page in its entirety, launch it from either the Public Folders or My Folders section of IBM Cognos Connection.

Show details Retry Hide this message. Processing your request...

IBM Cognos Viewer - IBM Cognos Viewer IBM Cognos Viewer

The forward URL does not exist or it has failed validation. Ensure that a valid forward URL is specified.

Set variables - Specify variables for this entry. List of variables for this entry Name Value Add a variable Remove No variables specified. Variable names must have a value.