Between and Greater than or equal to Less than or equal to Between and On or after On or before On Between and On or after On or before At Between and On or after On or before On Between and or more or less

Parameter '' cannot cascade on itself. There is a cyclic condition in the cascading prompt setup relating to parameter ''. This cyclic condition is not allowed. Unable to populate the parameter cache because retrieving report parameters requires prompt values. Report has no link to model or module so parameter cache can't be used. Try opening and saving report in Report Studio to restore link. Unable to determine report version for so parameter cache can't be used. An error occurred processing the parameter cache for . The model or module versions can't be determined for so the parameter cache will not be used. The form field '' does not contain valid XML. Unable to populate the parameter cache because an error occurred.

The value of option was modified after applying the global override option settings. Option was discarded after applying the global override option settings. Unable to parse the expression . Encountered a parameter value with no name or an empty name. Failed to decrypt the option . Loading the configuration file '' failed.

Failed to validate the variable expression due to the missing item in any query. Invalid expression . Unable to find the item in the query . Unable to find query information for the item . Cannot burst charts or crosstab reports. The Burst query is: . Failed to validate the layout expression due to the missing item in the query . Charts or crosstabs may not be sectioned. Failed to load the report specification. The burst query cannot be a detail query. The burst query cannot be a nested query. The master-detail link is out of the scope of the master query The master-detail link is missing from the crosstab or chart. Failed to validate the static rich text xml doc against rich text dtd specification. The following expression is not valid: . If the item exists in a query but is not referenced in the layout, add it to a property list. Cannot find the reference to a valid table of contents in the Table of Contents bookmark. Failed to validate the variable . . Failed to validate the conditional layout expression , . The member caption can only be used in the scope of crosstab or chart. The groups in the frame do not match the levels in the query . Cannot burst custom content reports. The Burst query is: . An element with name '' cannot be found. The 'Label For' property must refer to a valid element name. Cannot include pageset when report pages are viewed as tabs. The report "queries" cannot use both "query" and "modQuery". Cannot find type="module" attribute on modelPath. Cannot find type="FM" attribute on modelPath. The parameter is used in queries which are based on different models/modules. The global parameter is used in the context of a cascading prompt control. The cascading behavior may not work as expected if the global parameter is modified using the global parameter UI. Cannot include bookletItem when report pages are viewed as tabs. Drill-through action is not supported on this data container. Bookmark in drill-through is not supported on this data container. Dynamic filtering in drill-through is not supported on this data container.

Unable to open the CSS file ' '. Invalid CSS Selector found ' '. Invalid character found while process a CSS ' '. Invalid CSS Declaration found ' '. Parsed token overflows static buffer ' '. Failed to apply the style due to the missing variable value in the variable . Invalid attribute found during formatting of data. Attribute is ' '. Can not find attribute during formatting of data. Wrong object type set for an attribute. Reports with more than 256 columns can not be rendered in Excel. This report has been truncated since since it exceeds the Excel spreadsheet row limit. DOM exception: a node was misplaced in the hierarchy request. DOM exception: data is specified for a node which does not support data. DOM exception: attempted to modify an object where modifications are not allowed. DOM exception: attempted to reference a node that does not exist. DOM XALAN exception: attempted to add an attribute that is already in use. DOM XALAN exception: an invalid or illegal string is specified. DOM XALAN exception: a parameter or an operation is not supported by the underlying object. DOM exception: unknown. XSL exception ' '. SAX exception ' '. XML exception ' '. DOM exception: the index size is out of range. Unable to fit the specified range of text into a DOM string. DOM exception: a node must be used in the same document that created it. DOM exception: an invalid character was specified. DOM exception: this type of object or operation is not supported. DOM exception: the state of this object is invalid. DOM exception: Attempted to modify the type of the underlying object. DOM XALAN exception: attempted to create or change an object that is incompatible with the namespace. There must be one instance of burstGroups. burstGroup must be an element. Attribute not found: ''. Element not found: ''. The specified value '' is not a valid enumeration value. Circular dependency found for layout component reference element named ''. A conditional layout must have an expression that is not data dependent. The expression is ' '. Invalid attribute: ''. Failed to evaluate expression: ''. The datasource must be evaluated to a numeric value. The metric data store ImageID is empty. The map chart data contains references to missing region names. Map file: '', missing region names: ''. Review the chart data and the map dictionary. The map chart data contains references to duplicate region names. Map file: '', duplicate region name: ''. Review the chart data and the map dictionary. The map chart contains references to missing point names. Map file: '', missing point names: ''. Review the chart data and the map dictionary. The map chart data contains references to duplicate point names. Map file: '', duplicate point name: ''. Review the chart data and the map dictionary. The map chart data contains references to missing or duplicate features. Map file: '', missing region names: '', missing point names: '', duplicate region name: '', duplicate point name: ''. Review the chart data and the map dictionary. This chart cannot be represented in a crosstab report. Unable to render the XML or CSV output. The layout does not refer to a query. Unable to render the XML or CSV output. Referenced component '' could not be located in current report'. For the '' measures are not allowed on either of the edges. Measures are not allowed for ''. Attribute PercentScale for percent formatting can not be a positive value Invalid chart legend position coordinates. Conditional display values associated with prompt controls must not have an expression that is data dependent. The expression is ' '. This document is a Web archive file. Your browser or editor does not support Web archive files. For more information on the Web archive format, go to http://officeupdate.microsoft.com/office/webarchive.htm. The element '' is not a valid child element of the '' element. The which uses '' on page '' has too many risers. The named '' which uses '' on page '' has too many risers. On element '' the attribute 'refDataItem' cannot be empty or missing. On element '' the attribute 'parameter' cannot be empty or missing. Invalid chart note position. On element '' the attribute '' has an invalid value of ''. Report variable '' not found. Failed to perform XSL transformation Cannot configure the parameter '' using the XSL parameters Run option. The Conditional Style Range datatype must be number, date, time, datetime, or interval. Crosstab containing a list is not supported. Crosstab containing a repeater or repeater table is not supported. The object's size (width and/or height) is too large for PDF processing to handle The ListColumnRowSpan element '' does not have a corresponding ListGroup element. Attribute 'RepeatEveryPage' is only allowed on the last dataItem for a Crosstab Row. Attribute 'RepeatEveryPage' is not allowed for a Crosstab Column. The data item reference in the crosstab space is not valid. The conditional layout expression is not valid. The expression is ' '. The cssUrl run option '' is invalid because the path contains multiple folder redirections. The member caption can only be used in the scope of crosstab or chart. The query item '' is out of the scope of the query. The drill data item '' in query '' appears in more than one 'linkedDrillItemSet'. The PDF page width must be larger than default page margin width '' inch. Unable to render a cross-tab because no data was returned for its default measure edge Table of Contents bookmark '' is already defined . The attribute matrixLevels in v2_matrixColumns is invalid. The attribute matrixLevels in v2_matrixRows is invalid. The v2_series is invalid. The v2_category is invalid. Suppression specified more than once. Crosstab or chart is not supported in the Excel 2007 Data output format. The number of worksheet columns is larger than the maximum worksheet columns setting. The chart style referenced by chart cannot be found. The requested page number '' is invalid. The requested page count '' is invalid. The name of a booklet item is missing or empty. The booklet item name '' is used more than once. The booklet item name '' must not contain the character [ or ]. The specified PDF confidentiality algorithm '' is not supported. Cannot include pageset when report pages are viewed as tabs. The number of columns is larger than the maximum PDF columns setting. The tree prompt is not supported. The select and search prompt is not supported. The drill through for multiple package is not supported. Crosstab or chart is not supported in the data set output format. Reprompting on a page that was skipped due to conditional rendering is not supported. The required parameter '' is defined but has no value. The required parameters '' are defined but have no value. The report expression in baseline is not supported.

The request is missing the element. The document contains an error at line '', column ' '. The report specification contains an error at line ' ', column ' '. Failed to create a Document Object Model representation of the report specification. The report specification is missing the 'report' root element. The file '' does not exist. The report specification contains an error at line ' ', column ' '. This report specification uses features that were introduced in an interim fix release. The error may be because your BI server instance is not at a compatible interim fix version. The request was cancelled. The request was cancelled. The user does not have the assigned capability to use bursting. The user does not have the assigned capability to use HTMLItem. The user does not have the assigned capability to use '' layout element. An application error has occurred. Contact your Administrator. An application error has occurred while processing the WSDL message ''. Contact your Administrator. An application error has occurred during the asynchronized processing of the WSDL message ''. Contact your Administrator. The report server encountered an internal error. Check additional information associated with this error message. If cause of problem cannot be ascertained, increase the logging level in the IBM Cognos administration tool and reproduce the conditions that caused the error. If the problem persists, see the problem determination information on the IBM Cognos Support Portal page at http://www-947.ibm.com/support/entry/portal/Overview/Software/Information_Management/Cognos_Business_Intelligence. Trace back: The request parameter of the getMetadata method is empty. The given report specification is invalid, the 'report' root element is missing. Expected values for one parameter in the parameters node. Could not find the parameter value in the parameters node. The parameter name is missing from the parameters node. The specified parameter is missing from the report specification. The member unique name is missing from the parameters node. Unexpected parameter value type found in the parameters node. This report specification does not have a version specified. The option '' is not supported. Failed to retrieve metadata. A user preference in the BI Bus header is missing a name. Failed to open the pipe to execute the command: . Error code: , error string: The Report Server process did not initialize properly. Contact your Administrator. The XSL file '' can not be qualified by a path and must be located in the Report Server templates folder. The document '' contains an error at line '', column ''. The drill operation can only performed in interactive mode. An error occurred while executing the '' command. An error occurred while executing the 'closeConnection' command. The run option is invalid. A soap fault has been returned. This report contains upgrade errors and cannot run. Open the report in Report Studio to review and fix the upgrade errors. The controller thread for concurrent query execution has encountered an error. All queued queries have been removed. The data item associated with the tree prompt is not valid. The report specification is not valid because "" is not a valid value for the attribute " " in "". The url(s) '' is not safe because either it has an unrecognized protocol or its host is not in the configuration domain list. The report specification element "" is not valid. Could not find package capabilities associated with report model "". The run option is missing a value. The value '' of the useStyleVersion run option value is invalid. See the report specification for acceptable values. The current user does not have the capabilities required to perform the operation. The XSL file name '' contains invalid characters: '%' The drill expression for data item in query has been reverted from to . Failed to submit report output to repository service cache The report server extension "" failed to modify the report specification. The reason for the failure: . The report server extension was not properly initialized. Check logs for further information. The call to the report server extension initialize failed. The report server extension configuration is invalid. The report server extension was not found at the location defined in the configuration file. The report server extension entry point getExtension() was not found. The report server extension version is . Expected version is . The report server extension getExtension() call failed. A booklet item that references the report creates an infinite loop. The state data in the drill option is not valid. The report execution was restarted by the extension library. The data item associated with the prompt control is not valid. The report schema is a newer version than the currently supported version . Generating data set data failed. Response was . Generating base module failed. Response was . Getting geo data failed. Response was . Saving report output to cloud storage failed. Response was .

Cannot save output. The report being executed must be specified as a reference to a Content Manager report. Multiple formats are not supported unless Save, Print, or Email is selected. You must specify Save, Print, or Email when bursting a report. You must save the report output before you can mail a report link. The requested format '' is not supported. An error occurred opening the file ''. The error code is and the error message is '' Multiple locales are not supported unless Save, Print, or Email is selected. The print process returned a status code of . The printer name '' contains one or more potentially unsafe characters. An error occurred while saving the output for the burst instance '' with the recipients (). The details are: The list of recipients is empty for burst instance ''. The output for this burst instance was discarded. Unable to deliver the output of the report. See the run history details for more information. Ensure that the required services are started. Ensure that the user account is configured to distribute the output in the requested manner. The print request failed. Verify that the printer name is valid. The print request failed. Verify that a default printer is defined on the application server. The print request failed. Verify the version of the print processor on the application server. This output format is not supported for an IBM Cognos Active Report. This action is not supported for an IBM Cognos Active Report. Multiple formats are not supported for an IBM Cognos Active Report. The printer object '' does not exist or the user does not have read permission or it does not have a printer address defined. An error occurred while saving the output for the burst instance '' with the recipients (). The details are: Some of the recipients refer to an incorrect object. Data URI is not supported for an IBM Cognos. You can only specify Save when running a data set. A data set connot be burst. Multiple formats or this format is not supported when saving data set output. The user does not have the assigned capability to save output to the cloud.

A new version of the report ‘’ is available. The parameter cache was created. The parameter cache was not created because of a version mismatch. The parameter cache was not created because it is disabled.

The required element '' is missing from the request. The required child element '' is missing from the element ''. The search path '' references an object class of type '' in Content Manager, but an object class of type '' was expected. Report specifications with the root element localname '' are not supported. The given report specification is not a valid XML document. The requested SpecificationFormat is invalid. The database Password could not be decrypted. The request did not include a report specification to be executed. The request did not include a report specification to be executed, or a reference to an object in Content Manager. No sessions are currently available. Contact your Administrator. IBM Cognos Graphics Service did not return an object with the name ''. Please review the specification or contact your Administrator. The operation '' is not allowed at this time. The absolute affinity request '' failed, the requested session does not exist. The report view '' has no source report. The source report '' referenced by the report view '' is not an authored report. The authored report '' has no specification. The secondary request failed. The requested session does not exist and failover has been disabled. Contact your Administrator. The secondary request failed. The requested session does not exist and the secondary request does not contain enough information to recreate the session. Contact your Administrator. Failed to cancel the request: . Failed to release the request: . The request was improperly signed. The secondary request failed. The requested session does not exist and is required for the absolute affinity request ''. Contact your Administrator. The specified SOAP action '' does not match the expected value '' of the '' method. The request '' failed because a previous request that returned a status of conversation complete cancelled the conversation. The request '' failed because a previous request that returned a fault cancelled the conversation. The request '' failed because the conversation was already released. The request '' failed because the conversation was already canceled. The request '' failed because the conversation was removed from the system to make room for other conversations. The inactivity timeout ( seconds) is too small for ReportService to be able keep the passport alive during long running requests. The minimum value is . ReportService failed attempting to ping passports. Successfully pinged of passports. The operation 'release' is not allowed at this time because the conversation is still active. Could not execute object '' of type '' because a pluggable authored report generator library for this type does not exist or could not be loaded. The session cache purged of the existing conversation(s). A failover condition was triggered to reclaim missing session. Operation failed and returned the following information: Call to private method with unknown command ''. The saveSearchPath option is invalid on a run request. saveSearchPath is not allowed on a report that has the run as owner or run with owner capabilities set.

Can't save report view ''. Existing report view has a different source report. The current user does not have the capabilities required to run the '' operation. Contact your Administrator. Content Manager did not return an object for the requested search path ''. The user does not have execute permission on this report. An error occurred while trying to add run history detail information. The specification signature is invalid. The base object does not contain a searchPath or a storeID. The content manager cache service will no longer be used by the report server because the service is disabled. The user capability cache signature is invalid. An error occurred while trying to update the report cache. The content manager cache data could not be validated. The user does not have execute permission for ''.

An error occurred while cleaning up data iterators. The system entered an invalid state. Unexpected exception caught in .